Chinese Journal of Catalysis ›› 2026, Vol. 82: 125-134.DOI: 10.1016/S1872-2067(25)64913-8

• Articles • Previous Articles     Next Articles

An active and durable anode catalytic layer with in-situ exsolved Pd-Ni nanoparticles for protonic ceramic fuel cells on hydrocarbon fuels

Wenjie Gong, Yangsen Xu, Hao Liu, Wanbin Lin, Zhiwei Du, Yixuan Huang, Jiang Liu, Yu Chen*()   

  1. School of Environment and Energy, South China University of Technology, Guangzhou 510006, Guangdong, China
  • Received:2025-07-31 Accepted:2025-09-24 Online:2026-03-18 Published:2026-03-05
  • Contact: * E-mail: eschenyu@scut.edu.cn (Y. Chen).
  • Supported by:
    Guangdong Basic and Applied Basic Research Foundation(2024A1515010448);Introduced Innovative R&D Team of Guangdong(2021ZT09L392);National Natural Science Foundation of China(22179039);Fundamental Research Funds for the Central Universities(2022ZYGXZR002);Guangzhou Science and Technology Project(2024A04J3079);Zijin Mining Group Co., Ltd(5405-ZC-2023-00008);Pearl River Talent Recruitment Program(2019QN01C693)

Abstract:

Operating hydrocarbons on protonic ceramic fuel cells (PCFCs) is promising and attractive, on account of their high energy conversion efficiency and potential for low carbon emissions compared to traditional thermal power generation. However, poor coking tolerance and insufficient catalytic activity at intermediate temperatures greatly hinder the development of PCFCs on hydrocarbons. Exploring a catalytic layer with high activity and durability is an effective way to achieve high-performance PCFCs on hydrocarbon fuels. Herein, we report an anode catalytic layer (ACL) with an optimized formula of Pd0.01Ni0.09Ce1.9O2-δ (P1NC). Pd-Ni alloy nanoparticles are exsolved from the ACL under a hydrogen atmosphere. The high oxygen vacancy concentration in P1NC has shown a positive effect on the oxygen storage capacity, which may facilitate carbon gasification, thereby reducing performance degradation during PCFC operation, as supported by the Raman and scanning electron microscopy observations. PCFCs with this ACL achieved a decent peak power density (Pmax) of 1.20 W cm-2 and stably operated at 0.2 A cm-2 at 650 °C on CH4. In addition, the cells with P1NC ACL exhibited encouraging Pmax of 1.00 and 0.87 W cm-2 at 650 °C on liquid fuels such as methanol and ethanol, respectively, exhibiting good fuel flexibility.

Key words: Protonic ceramic fuel cells, Steam methane reforming, Anode catalytic layer, Pd-Ni nanoparticles, Fuel flexibility