催化学报

催化学报 ›› 2013, Vol. 34 ›› Issue (10): 1839-1847.DOI: 10.1016/S1872-2067(12)6668-8

• 研究论文 • 上一篇    下一篇

Desulfurization of liquid fuels using air-assisted performic acid oxidation and emulsion catalyst

Ahmad Imtiaz, Ahmad Waqas, Ishaq Muhammad   

  1. Institute of Chemical Sciences, University of Peshawar, 25120, Khyber Pukhtunkhwa, Pakistan
  • 收稿日期:2013-06-10 修回日期:2013-07-08 出版日期:2013-09-29 发布日期:2013-09-29

Desulfurization of liquid fuels using air-assisted performic acid oxidation and emulsion catalyst

Ahmad Imtiaz, Ahmad Waqas, Ishaq Muhammad   

  1. Institute of Chemical Sciences, University of Peshawar, 25120, Khyber Pukhtunkhwa, Pakistan
  • Received:2013-06-10 Revised:2013-07-08 Online:2013-09-29 Published:2013-09-29
  • Contact: Ahmad Waqas

PDF

862

摘要：

Catalytic oxidative desulfurization (ODS) of model oil and commercial oil samples was investigated using an air-assisted performic acid oxidation system with a phase transfer or emulsion catalyst comprising a quaternary ammonium salt-based heteropolyoxometalate. Different emulsion catalysts with a Keggin type heteroployoxometalate anion (containing W, Mo, and V) and cetyltrimethylammonium bromide cation were prepared and characterized by X-ray fluorescence, Fourier transform infrared spectroscopy, and scanning electron microscopy. [C16H33N(CH3)3]3[PW9Mo3O40] was the most effective catalyst in the current oxidation system, which reduced the sulfur content of the model oil from 1275 μg/g to 57 μg/g. The reactivity order of different model sulfur compounds was thiophene < dibenzothiophene < 4,6-dimethyldibenzothiophene. The ODS of model sulfur compounds followed first order kinetics with apparent activation energy from 29 to 27 kJ/mol. The catalysts also performed efficiently in the ODS of the industrial oil samples, including untreated naphtha, light gas oil, heavy gas oil, and Athabasca oil sands derived bitumen, for which sulfur removal rates were 83%, 85%, 68% and 64%, respectively.

关键词: Catalytic oxidative desulfurization, Performic acid oxidation, Emulsion catalyst, Heteropolyoxometalate, Air oxidation

Abstract:

Catalytic oxidative desulfurization (ODS) of model oil and commercial oil samples was investigated using an air-assisted performic acid oxidation system with a phase transfer or emulsion catalyst comprising a quaternary ammonium salt-based heteropolyoxometalate. Different emulsion catalysts with a Keggin type heteroployoxometalate anion (containing W, Mo, and V) and cetyltrimethylammonium bromide cation were prepared and characterized by X-ray fluorescence, Fourier transform infrared spectroscopy, and scanning electron microscopy. [C16H33N(CH3)3]3[PW9Mo3O40] was the most effective catalyst in the current oxidation system, which reduced the sulfur content of the model oil from 1275 μg/g to 57 μg/g. The reactivity order of different model sulfur compounds was thiophene < dibenzothiophene < 4,6-dimethyldibenzothiophene. The ODS of model sulfur compounds followed first order kinetics with apparent activation energy from 29 to 27 kJ/mol. The catalysts also performed efficiently in the ODS of the industrial oil samples, including untreated naphtha, light gas oil, heavy gas oil, and Athabasca oil sands derived bitumen, for which sulfur removal rates were 83%, 85%, 68% and 64%, respectively.

Key words: Catalytic oxidative desulfurization, Performic acid oxidation, Emulsion catalyst, Heteropolyoxometalate, Air oxidation