催化学报 ›› 2026, Vol. 84: 324-336.DOI: 10.1016/S1872-2067(26)65004-8

• 论文 • 上一篇    下一篇

活性气体调控金属纳米结构核性并提升催化活性

Alexey S. Galushkoa,1, Ilya V. Chepkasovb,1, Ruslan R. Shaydullina, Daniil A. Boikoa, Alexander G. Kvashninb, Artem M. Abakumovb, Valentine P. Ananikova()   

  1. a 俄罗斯科学院泽林斯基有机化学研究所, 莫斯科, 俄罗斯
    b 斯科尔科沃科学技术学院, 莫斯科, 俄罗斯
  • 收稿日期:2025-09-09 接受日期:2026-01-12 出版日期:2026-05-18 发布日期:2026-04-16
  • 通讯作者: *电子信箱: val@ioc.ac.ru (V. P. Ananikov).
  • 作者简介:1共同第一作者.
  • 基金资助:
    俄罗斯科学基金(23-13-00171)

Reactive gas modulation alters metal nanostructures nuclearity and boosts catalytic activity

Alexey S. Galushkoa,1, Ilya V. Chepkasovb,1, Ruslan R. Shaydullina, Daniil A. Boikoa, Alexander G. Kvashninb, Artem M. Abakumovb, Valentine P. Ananikova()   

  1. a Zelinsky Institute of Organic Chemistry, Russian Academy of Sciences, Moscow 119991, Russia
    b Skolkovo Institute of Science and Technology, Moscow 121205, Russia
  • Received:2025-09-09 Accepted:2026-01-12 Online:2026-05-18 Published:2026-04-16
  • Contact: *E-mail: val@ioc.ac.ru (V. P. Ananikov).
  • About author:1Contributed equally to this work.

摘要:

多相催化是现代工业的基石, 涉及超过80%的工业催化过程, 其优势在于催化剂的高耐久性、低产物污染以及易于分离. 然而, 与均相催化相比, 多相催化剂的活性往往较低, 尤其是在精细有机合成领域. 在多相催化剂中, 单原子催化剂(SACs)因其活性中心以原子级分散、催化行为接近均相体系而备受关注, 在碳-碳交叉偶联等反应中展现出巨大潜力. 然而, SACs的规模化应用仍面临合成方法复杂、难以实现纯单原子分散状态等挑战,实际反应过程中催化剂金属活性位点通常以单原子与纳米粒子共存的形式存在.

本文在温和条件(低压、低温)下, 揭示了金属纳米粒子在活性气体(CO、NO、H2、H2O和O2)调控下的表面动态行为. 结合量子化学模拟、实验方法和机器学习方法, 阐明了不同活性气体对金属纳米结构核性的调控机制: NO促进纳米粒子分裂成高活性的单原子物种; H2、H2O和O2诱导纳米粒子生长; CO则起到稳定纳米颗粒的作用. 基于活性气体调控效应, 可灵活控制纳米颗粒的尺寸和分布, 为金属纳米结构核性的调控提供了便捷路径. 以NO气体处理的Pd/C催化剂为例, 其在35 °C温和条件下显著促进Suzuki-Miyaura交叉偶联反应. 此外, 该方法对Ni、Fe、Co、Cu、Au、Pt、Ru、Ir、Rh等多种金属均表现出了适用性, 展现出了广泛潜力.

综上, 本文通过理论计算与实验相结合的多层次研究, 开发了一种快速、节能、易于推广的活性气体调控方法, 实现了克级规模SACs的可控制备, 为精细有机合成中高效催化体系的设计提供了新策略, 也为催化与材料科学在纳米尺度上的发展开辟了新路径.

关键词: 单原子中心, 金属纳米颗粒, 动态表面现象, 金属核性调控, 催化剂活化, 多相催化

Abstract:

This study describes the dynamic behavior of metal nanoparticles on surfaces modulated by reactive gases (CO, NO, H2, H2O, and O2) under soft conditions at low pressure and temperature. Quantum chemical simulations, experimental methods, and machine learning revealed distinct effects: NO promoted nanoparticle fragmentation into highly active single-atom species; H2, H2O, and O2 induced nanoparticle growth; and CO stabilized their structure. This reactive gas modulation (RGM) effect enables flexible control over nanoparticle size and distribution, advancing nanoscale metal tuning. In practical applications, NO gas enhanced the performance of the Pd/C catalyst, facilitating Suzuki-Miyaura cross-coupling under mild conditions (35 °C) with superior efficiency. The developed approach was evaluated for other metals and corresponding effects were studied (Ni, Fe, Co, Cu, Au, Pt, Ru, Ir, Rh), demonstrating versatile possibilities to control nanoscale morphology. The results highlight a flexible metal nuclearity control tool based on the RGM effect in the optimization of catalytic systems for fine organic synthesis, opening the way for advances in catalysis and materials science through nanoscale precision. Through a multilevel study using theoretical and experimental approaches, a methodology for a rapid, energy-efficient and easily scalable approach to synthesize single-atom catalyst at the gram-scale was developed.

Key words: Single-atomic centers, Metal nanoparticles, Dynamic surface phenomena, Metal nuclearity control, Catalyst activation, Heterogeneous catalysis